ماكينة تشكيل البلاستيك ROLBATCH RBSDMS-IZS-678

This ROLBATCH RBSDMS-IZS-678 was made in 2016. It is equipped with a Mill PLC control unit. The machine has a maximum film thickness of 0.3-1 mm.
Machine Benefits
Qualitative Machine Benefits
Machine can be seen and tested
The machine is like new, fully functional.
The machines typically consume between 60 and 80% of the installed power because the highest energy consumption occurs during startup and when the heating elements are warming up. After that, only reheating to the required temperature is needed. The machine is equipped with frequency inverters for the motors, so it does not continuously use the full installed power but significantly less.
Technical Machine Benefits
3-5 layer flat film line used 3-5 layer pp / ps cast film line
Throughput capacity: up to 450 kg / hour
Raw material: pp or ps
Maximum film thickness: 0. 3-1 mm / maximum film width: up to 1600 mm
Extrusion line for thick calendered polypropylene and polystyrene films, suitable for thermoforming.
Installed motor power: 278 kw / heating power: 201 kw / required power supply: three-phase current, 50 hz / compressed air consumption: 0. 2 m³/min / water consumption: 30 m³/h /
Extra Information
The line consists of: Single-screw extruder 75 mm x 2 pieces Single-screw extruder 120 mm x 1 piece Screen changer x 3 pieces Extrusion head for 5-layer film extrusion (C/B/A/B/C) Calender x 3 pieces Take-off winding station x 3 pieces
application type: Extrusion
Location: Germany
machine type: Film Extruder
Machine Depth: 32400 mm
Marke: ROLBATCH